Activated aluminum for hydrogen generation from water

F. Manilevich 1,
 
Yu. Pirskyy 1,
 
A. Kutsyi 1,
 
V. Berezovets 2,
 
V. Yartys 3
 

1 Інститут загальної та неорганічної хімії ім. В. І. Вернадського НАН України , Київ
2 Фізико-механічний інститут ім. Г.В. Карпенка НАНУ, Львів, Україна
3 Institute for Energy Technology, Kjeller NO-2027 , Норвегія

ВОДНЕВІ ТЕХНОЛОГІЇ ЗБЕРІГАННЯ ЕНЕРГІЇ: СТАН ТА ПЕРСПЕКТИВИ РОЗВИТКУ - Львів: Простір-М, 2021
https://doi.org/10.15407/materials2021.081

Анотація

Al-based alloys and mechanochemically activated aluminum powders were prepared in this study, and the regularities of their hydrolysis reaction with water were studied. Aluminum alloys were prepared by melting aluminum with additions of Ga–In–Sn eutectic (5 wt.%), bismuth (3 wt.%), antimony (3 wt.%), or zinc (3 wt.%). The temperature-dependent kinetics of their hydrolysis in a temperature range 25–70 °C was studied by using a volumetric technique. The most efficient activation of the hydrolysis process was achieved for the Al–Ga– In–Sn-Zn alloy, particularly at low temperatures (5 and 25° C). The addition of bismuth to the Al–Ga–In–Sn alloy significantly decreases the hydrolysis rate, whereas the addition of antimony has only a weak effect on the process, despite the fact that the standard electrode potentials of bismuth and antimony have rather close values. Commercially available aluminum PA-4 and ASD-1 powders were mechanochemically activated by Ga–In–Sn or Ga–In–Sn–Zn eutectic alloys (5 wt.%) and graphite (1–3 wt.%) in a mixer type ball mill. Subsequently, they were pressed (P = 4 MPa) into the pellets, which were used to generate hydrogen from water via the hydrolysis process. X-ray diffraction study of the milled PA-4 powder revealed the presence of four phases, including aluminum, graphite, and two In–Sn intermetallic compounds (In3Sn and In1–xSnx, were x ≈ 0.04). The quantitative analysis by EDX showed a uniform distribution of the activating additives over the pellet surface, while the graphite was partly aggregated. Studies on the hydrolysis kinetics when utilizing Al-based pellets demonstrated that the process readily proceeds at temperatures ≥ 5° C. At the same time, the efficiency of hydrogen generation depends on the amount of the added graphite, particle size of aluminum powders, duration and medium of their mechanochemical treatment, and the hydrolysis temperature.


Завантажити повний текст

АКТИВОВАНІ АЛЮМІНІЄВІ ПОРОШКИ, АЛЮМІНІЄВІ СПЛАВИ, ГЕНЕРАЦІЯ ВОДНЮ, ГІДРОЛІЗ

Посилання

[1] Kozin L.H., Volkov S.V., Skryptun I.N. Modern Hydrogen Energetics and Ecology. K.: Akademperiodyka, 2019. 364 p.

[2] Tarasov B.P. and Lototskyi M. V. Hydrogen energetics: past, present, and prospects. Russ. Khim. Zh., 2006, vol. 50, No. 6, pp. 5-18.

[3] Goltsov V. A. Veziroglu T. N., Goltsova L. F. Hydrogen civilization of the future - A new conception of the IAHE. Int. J. Hydrogen Energy, 2006, vol. 31, No. 2, pp. 153-159.

[4] Varshavskyi I.L. Energy-Accumulating Substances and Their Applications [in Russian]. K.: Nauk. Dumka, 1980. 240 p.

[5] Ziebarth J.T., Woodall J.M., Kramer R.A., Choi G. Liquid phaseenabled reaction of Al-Ga and Al-Ga-In-Sn alloys with water. Int. J. Hydrogen Energy, 2011, vol. 36, No 9, pp. 5271-5279.

[6] Shkolnikov E.I., Zhuk A.Z., Vlaskin M.S. Aluminum as energy carrier: Feasibility analysis and current technologies overview, Renewable and Sustainable Energy Reviews, 2011, vol. 15, No 9, pp. 4611-4623.

[7] Plevachuk Yu., Sklyarchuk V., Eckert Sv., Gerbeth G., Novakovic R. Thermophysical Properties of the Liquid Ga−In−Sn Eutectic Alloy, J. Chem. Eng. Data, 2014. vol. 59, No 3, pp. 757-763.

[8] Grin Yu.N., Gladyshevskij R.E. Gallides [in Russian]. M.: Metallurgiya, 1989. 304 p.

[9] Rietveld H.M. A profile refinement method for nuclear and magnetic structures. J. Appl. Crystallogr, 1969, vol. 2, No. 2, pp. 65−71.

[10] Rodriguez-Carvajal J. Recent advances in magnetic structure determination by neutron powder diffraction, Physica B: Condensed Matter., 1993, vol. 192, No. 1–2, pp. 55–69.

[11] Manilevich F.D., Kozin L.Kh., Danil'tsev B.I., Kutsyi A.V., Pirskyy Yu. K. Regularities of the hydrolysis of aluminum activated with the eutectic alloy of gallium, indium, and tin. Ukr. Khim. Zh,. 2017, vol. 83, No. 7, pp. 51-59 [in Ukrainian].

[12] Manilevich F.D., Pirskyy Yu.K., Danil'tsev B.I., Kutsyi A.V., Yartys V.A. Studies of the hydrolysis of aluminum activated by additions of Ga–In–Sn eutectic alloy, bismuth or antimony, Mater. Sci., 2020, vol. 55, No. 4, pp. 536–547.

[13] Manilevich F.D., Pirskyy Yu.K., Kutsyi A.V., Danil'tsev B.I. Regularities of hydrolysis of aluminum activated by Ga-In-Sn eutectic alloy and zinc, Ukr. Khim. Zh., 2020, vol. 86, No. 2, pp. 63-77 [in Ukrainian].

[14] Manilevich F.D., Pirskyy Yu.K., Kutsyi A.V., Berezovets V.V., Yartys V.A. Studies of mechanochemically activated aluminum powders for generating hydrogen from water. Powder Metallurgy, 2021, No. 5/6, pp. 14-24.