Конференції
  1. Головна
  2. Структура
  3. Фізико-хімія і технології наноструктурних і функціональних матеріалів
  4. 07. Відділ фізичного матеріалознавства тугоплавких сполук
  5. Ковальченко А.М.
  6. Публікація

Surface damage and wear mechanisms of amorphous carbon coatings under boundary lubrication conditions

O.O.Ajayi 2,
 
А.М.Ковальченко 1*,
 
J. G.Hersberger 1**,
 
A.Erdemir 1***,
 
G. R.Fenske 1****
 

1 Argonne National Laboratory, Energy Techology Division, Argonne, IL 60439, United States
2 Argonne National Laboratory, ANL · Center for Transportation Research
* ankov@netzero.com, ** ajayi@anl.gov, *** ajayi@anl.gov, **** ajayi@anl.gov

Surface engineering, 2003, Т.19, #6
https://doi.org/10.1179/026708403225010181

Анотація

A class of amorphous carbon coatings with excellent tribological properties under dry conditions was recently developed at Argonne National Laboratory. In the present study, the performance of three variations of such coatings under the boundary lubrication regime was evaluated, with particular focus on the coating surface damage and mechanical aspect of the wear mechanisms of the coated surfaces. The evaluation employed ball on flat contact geometry in reciprocating sliding motion and three different lubricants. Compared with the uncoated steel surface, the three variations of the coatings evaluated significantly reduced the amount of wear. The surface damage in the coatings consisted primarily of localised crack formation at the local asperity points of contact typical of boundary lubrication regime. The cracks propagated over time, resulting in eventual removal of coating material.


АЛМАЗОПОДІБНЕ ПОКРИТТЯ, ВУГЛЕЦЕВЕ ПОКРИТТЯ, ГРАНИЧНЕ ЗМАЩУВАННЯ, ЗНОС, МЕХАНІЗМ ЗНОСУ, ПОШКОДЖЕННЯ ПОВЕРХНІ, ТЕРТЯ, ТРИБОЛОГІЯ

Посилання

1. c. d. radcliffe and d. dawson: ‘Tribology series’, Vol. 30, ‘Lubricants and lubrication’, (ed. D. Dowson et al.), 355 – 365. ;

2. r. s. fein:Lubr. Eng, 1991, 47, 1005 – 1008.

3. f. alliston-greiner,j. a. greenwood and a. cameron: Proc. Inst. Mech. Eng. C: Mech. Eng. Sci., 1987, C178/87, 565 – 572.

4. k. holmberg,h. ronkainen and a. matthews:Ceram. Int., 2000, 26, 787 – 797.

5. d. j. carre:Surf. Coat. Technol., 1990, 44, 609 – 617.

6. a. erdemir:Surf. Coat. Technol., 2001, 146 – 147, 292 – 297.

7. a. erdemir,o. l. eryilmaz,i. b. nilufer and g. r. fenske:Surf. Coat. Technol., 2000, 133 – 134, 448 – 454.

8. a. erdemir,o. l. eryilmaz and g. r. fenske:J. Vac. Sci. Technol., 2000, A18, 1987 – 1992.

9. o. o. ajayi,m. f. alzoubi,a. erdemir and g. r. fenske:Tribol. Trans., 2001, 44, 298 – 304.

10. ‘Charactgerisierung dunner Schichten’, DIN-Fachbericht 39, Beuth, Berlin, 1993.

11. d. cooper and a. j. moore: in ‘Tribology series’, Vol. 30, ‘Lubricants and lubrication’, (ed. D. Dowson et al.), 617 – 633; 1995. 

12. r. lawn,y. deng,p. miranda,a. pajares,h. chai and d. k. kim:J. Mater. Res., 2002, 17, 3019 – 3036

 

Публікації