Gogajev Kazbeck

Publications

• Durometric analysis of hardening of the near-surface layer of ADI during friction at the influence of the TRIP effect
  Y.Podrezov, N.Minakov, B.Shurigin, A.Golubenko, K.Grinkevich, M.Askerov, K.Gogajev (2023) Uspihi materialoznavstva, #7, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.37-49
• INFLUENCE OF DEFORMATION TEMPERATURE ON THE FORMATION OF CONTACTS IN TITANIUM POWDER RIBBONS PRODUCED BY SYMMETRIC AND ASYMMETRIC ROLLING
  V.Voropaev, K.Gogajev, O.Vdovychenko, Y.Podrezov, Y.Yevich (2023) Powder Metallurgy, #01/02, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.28-40
• PROCESS PROPERTIES OF GAS-ATOMIZED AND GROUND FINE MIXTURES OF HIGH-SPEED STEEL POWDERS
  O.Radchenko, K.Gogajev, V.Nazarenko (2023) Powder Metallurgy, #01/02, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.3-12
• Study of the rolling process of P6M5K5 powder by processing on a rolling mill
  K.Gogajev, V.Nazarenko, O.Radchenko (2022) Uspihi materialoznavstva, #4/5, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.106-110
• PHYSICAL AND PROCESS PROPERTIES OF THIN GAS-ATOMIZED R6M5K5 STEEL POWDERS PRODUCED IN DIFFERENT CONDITIONS
  O.Radchenko, K.Gogajev, V.Nazarenko (2022) Powder Metallurgy, #09/10, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.3-14
• CALCULATION OF GEOMETRIC PARAMETERS OF THE LAVAL NOZZLE AND GAS DYNAMIC SPRAYING CONDITIONS IN THE PRODUCTION OF FINE POWDER TOOLS
  D.M. Fedorov, K.Gogajev, O.Radchenko, Yu.V. Kolesnichenko (2022) Powder Metallurgy, #07/08, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.3-13
• REQUIREMENTS FOR METAL AND ALLOY POWDERS FOR 3D PRINTING (Review)
  O.Radchenko, K.Gogajev (2022) Powder Metallurgy, #03/04, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.3-28
• THE STRUCTURE AND PROPERTIES OF PRECIPITATION-STRENGTHENED COMPOSITES PRODUCED FROM A CAST ALLOY IN THE Al–Si–Mg SYSTEM
  Y.Podrezov, K.Gogajev, V.Voropaev, Y.Yevich, N.Korzhova, T.M. Legka (2021) Powder Metallurgy, #07/08, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.133-142
• THE EFFECT OF ROLLING CONDITIONS ON THE PROPERTIES OF ALUMINUM POWDER COMPOSITES REINFORCED BY SiC, TiC, AND  AlB₁₂ NANOPARTICLES
  K.Gogajev, V.Voropaev, Y.Podrezov, Y.Yevich, P.Mazur (2021) Powder Metallurgy, #01/02, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.45-56
• Cast steel with adjustable austenitic transformation during operation, obtained by electroslag remelting
  O.Sidorchuk, A.Mamonova, V.V.Lukianchuk, K.Gogajev, O.Radchenko, L.A.Myroniuk, V.Konoval, G.L.Shvedova, D.Myroniuk (2020) Uspihi materialoznavstva, #1, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.77-85
• THE INFLUENCE OF DEFORMATION MODES ON THE STRUCTURE AND PROPERTIES OF Al–Mg–Х POWDER COMPOSITES
  III. THE INFLUENCE OF NANOSIZED SiC POWDER CONTENT AND DEFORMATION PROCESSING ON THE PROPERTIES OF THE AMg5 ALLOY POWDER COMPOSITE
  K.Gogajev, V.Voropaev, O.Vdovychenko, Y.Podrezov, M.Gadzyra, Y.Yevich (2018) Powder Metallurgy, #09/10, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.3-11
• THE INFLUENCE OF DEFORMATION MODES ON THE STRUCTURE AND PROPERTIES OF Al–Mg–Х POWDER COMPOSITES
  II. HIGH-ALLOYED Al–Mg POWDER MATERIALS
  K.Gogajev, V.Voropaev, Y.Podrezov, Y.Yevich, A.Koval, Ye.O.Potipaka (2018) Powder Metallurgy, #07/08, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.25-33
• THE INFLUENCE OF DEFORMATION MODES ON THE STRUCTURE AND PROPERTIES OF Al–Mg–Х POWDER COMPOSITES. I. THE INFLUENCE OF ROLLING CONDITIONS ON THE MECHANICAL PROPERTIES OF ALUMINUM POWDER RIBBONS STRENGTHENED WITH SiC NANOPARTICLES
  K.Gogajev, V.Voropaev, O.Vdovychenko, Y.Podrezov, M.Gadzyra, Y.Yevich (2018) Powder Metallurgy, #05/06, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.11-20
• WEAR-RESISTANT HIGH-TEMPERATURE COMPOSITE SLIDE BEARINGS BASED ON TITANIUM ALUMINIDES
  K.Gogajev, V.Barabash, A.Demidik, O.Bykov, V.Varchenko, V.Syrovatka (2018) Powder Metallurgy, #03/04, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.77-82
• THE MECHANICAL AND FATIGUE PROPERTIES OF POWDERED TITANIUM STRIPS, OBTAINED BY ASSYMETRICAL ROLLING
  K.Gogajev, V.Voropaev, Y.Podrezov, Y.Lugovskiy, V.Nazarenko, A.Koval, Y.Yevich (2017) Powder Metallurgy, #01/02, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.69-77
• OPTIMIZING THE THERMOMECHANICAL PROCESSING OF JET-MOLDED CORROSION-RESISTANT STEEL
  O.Sidorchuk, K.Gogajev, O.Radchenko (2017) Powder Metallurgy, #01/02, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.19-23
• Mechanical properties of bainitic cast irons at high temperature
  Y.Podrezov, K.Gogajev, O.Koryak, D.Verbylo, S.Voloschenko, V.V.Kholyavko (2016) Electron Microscopy and Strength of Materials, #22, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.91-101
• The influence of residual austenite on the mechanical properties and wear characteristics of austempering ductile iron with spherical graphite
  K.Gogajev, S.Voloschenko, Y.Podrezov, N.Minakov, N.M.Marchenko (2016) Electron Microscopy and Strength of Materials, #22, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.38-50
• The Efectof Sealing Rollingon the Propertiesof Titanium Powder Mill Products.
  K.Gogajev, V.Voropaev, Y.Podrezov, Y.Yevich, A.Koval (2016) Powder Metallurgy, #11/12, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.3-11
• Process Approaches for Producing Complex Composite Inoculants by Rolling of Powder Mixtures.
  III. Production and Properties of Multi-Component Compacts and Rolled Strips of Powder Modifiers with Different Compositions
  K.Gogajev, S.Voloschenko, Y.Podrezov, O.Radchenko, L.A.Radchenko, Y.Yevich (2016) Powder Metallurgy, #09/10, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.3-10
• Technology Concepts for Producing Complex Composite Modifiers by Rolling Powder Mixtures.
  II. Compacting Conditions, Structure, and Properties of Two-Component Model Systems Fе–FeSi and Al–FeSi
  K.Gogajev, S.Voloschenko, Y.Podrezov, O.Radchenko, L.A.Radchenko, Y.Yevich (2016) Powder Metallurgy, #07/08, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.52-59
• Process Approaches for Producing Complex Composite Modifiers by Rolling Powder Mixtures.
  I. Powder Modidying Mixtures.
  Composition, Structure, and Properties.
  K.Gogajev, S.Voloschenko, Y.Podrezov, O.Radchenko, L.A.Radchenko (2016) Powder Metallurgy, #05/06, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.27-36
• Optimization of Assymetric Rolling Parameters of Titanium Powder by Finite-Element Method
  I.Yu.Prikhod´ko, M.A.Dedik, K.Gogajev, V.Voropaev, A.Icenko (2016) Powder Metallurgy, #01/02, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.17-25
• Study of Strain Behaviour Effect on the Properties of the Powder Material AMg5
  K.Gogajev, V.Voropaev, Y.Podrezov, D.Verbylo, O.Koryak (2015) Powder Metallurgy, #05/06, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.29-38
• Influence of mode molding on the structure and properties of semi-finished from the water spraying powders alloy AMg5
  K.Gogajev, V.Voropaev, D.Verbylo, N.Danilenko, A.Koval (2014) Electron Microscopy and Strength of Materials, #20, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.153-159
• Powder Metallurgy Production of 44NKHTYU Elinvars
  K.Gogajev, V.Ulshin, V.Voropaev (2013) Powder Metallurgy, #09/10, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.128-135
• Impact of technology for the structure and properties of elinvar alloys
  2. Alloy type 44НХТЮ
  K.Gogajev, P.I.Loboda, Yu.М.Romanenko, O.Radchenko, M.O.Pinchuk, V.V.Grabin (2013) Modern Problems in Physical Materials Science, #22, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.130-140
• Impact of technology for the structure and properties elinvariv
   1 . Modern outlook
  K.Gogajev, P.I.Loboda, Yu.М.Romanenko, O.Radchenko, M.O.Pinchuk (2013) Modern Problems in Physical Materials Science, #22, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.118-129
• Contact Stresses in the Deformation Zone and Average Pressure during Asymmetric Rolling of Metal Powders
  K.Gogajev, G.Kalutskiy, V.Voropaev, A.S.Kolpakov (2013) Powder Metallurgy, #03/04, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.12-19
• PRODUCTION OF Co–Cr–Al–Y–Si POWDER ALLOY
  N.Grechanyuk, K.Gogajev, †V.Zatovskiy (2012) Powder Metallurgy, #11/12, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.18-25
• Use of Composite Complex Modifiers from Rolled Powder Materials
  S.Voloschenko, K.Gogajev, V.Nepomnyaschiy, M.Askerov (2012) Powder Metallurgy, #09/10, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.141-148
• Production of Titanium Powder Bands using Asymmetric Rolling
  K.Gogajev, K.Gogajev, V.Voropaev, G.Kalutskiy, Y.Podrezov, D.Verbylo, O.Koryak (2012) Powder Metallurgy, #09/10, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.11-23
• Fractographic Analysis of Green Compacts of Metal Powders
  O.Radchenko, K.Gogajev, A.Koval, S.Firstov (2012) Powder Metallurgy, #03/04, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.141-153
• Properties of Composite Magnetoabrasive Powders with Surfactants
  V.Nepomnyaschiy, K.Gogajev, S.Voloschenko, T.Mosina, M.Askerov (2012) Powder Metallurgy, #01/02, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.18-21
• Technology of obtaining alloy powder CoCrAlYSi
  O.P.Vasilega, K.Gogajev, N.Grechanyuk, †V.Zatovskiy (2011) Modern Problems in Physical Materials Science, #20, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.108-116
• Making of bimetals by the powder metallurgy methods
  (Review)
  K.Gogajev, O.Radchenko, K.Nguen, L.O.Radchenko (2011) Modern Problems in Physical Materials Science, #20, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.101-107
• 
  K.K.Nguen, K.Gogajev, O.Radchenko (2009) Modern Problems in Physical Materials Science, #18, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.101-104
• 
  K.K.Nguen, K.Gogajev, O.Radchenko (2009) Modern Problems in Physical Materials Science, #18, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.89-100
• Computer modelling of asymmetric rolling of powder materials
  †A.Mikhaylov, K.Gogajev, V.Voropaev, G.Kalutskiy (2008) Mathematical Models and Computing Experiment in Material Science, #10, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.120