Local stress intensity factors along the front of the channel cracks at its intersection with the main crack

 

I. M. Frantsevich Institute for Problems of Materials Science of the NAS of Ukraine, Omeliana Pritsaka str.,3, Kyiv, 03142, Ukraine
Modern Problems in Physical Materials Science - Kiev: Frantsevich Institute for Problems of Materials Science NASU, 2011, #20
http://www.materials.kiev.ua/article/2054

Abstract

The intersection of parallel pore channels of the main crack (MC) is considered. The MC was perpendicular to axis of the channel. The channel cross section had the shape ofstarlike three-beam cracks. Angles of the MC front to plane of the channel cracks (CC) were 0, 30, 60 and 90°. The local stress intensity factors (SIF) KI, КII, КIII along the CC front which is located at distances of 0.15, 0.08, 0.04, 0.02, 0.012, 0 from the MC front were obtained. It is shown that the maximum local SIF for CC, whose plane is parallel to the MC front, four times higher than the SIF for CC, whose plane is perpendicular to the MC front. The absolute value of the total SIF of shearing and tearing КІІ+III = (К2II + К2III)1/2 at the CC front has three local maxima: central— at the intersection of the CC front with the MC plane and side peaks near the MC on both sides of its plane.


CRACK INTERSECTION, MAIN CRACK, PORE CHANNEL, STARLIKE CRACK, STRESS INTENSITY FACTOR